// Copyright (c) 2009, Wolver Wang, Innov Inc. R&D Center // [email protected] // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // 1. Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // 3. All advertising materials mentioning features or use of this software // must display the following acknowledgement: // This product includes software developed by Wolver Wang. // 4. The name of the author may not be used to endorse or promote // products derived from this software without specific prior // written permission. // // THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS // OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED // WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY // DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE // GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, // WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /// // Go to Project/settings/linker => select catergory 'input". // Here by right click on Segment/section name, you can create // a new segment 'UserApp' and then create a section '.usr_tab' // under this segment. Then allocate the address to this segment/section. // Includes ------------------------------------------------------------------ //---------------------------------------------------------------------------- // Exported macro ------------------------------------------------------------ //---------------------------------------------------------------------------- // Exported types ------------------------------------------------------------ typedef void @near (*interrupt_handler_t)(void); struct interrupt_vector { unsigned int interrupt_instruction; interrupt_handler_t interrupt_handler; }; // Exported functions ------------------------------------------------------- extern @near void _stext(); // startup routine extern @near @interrupt void TRAP_IRQHandler(void); // TRAP extern @near @interrupt void TLI_IRQHandler(void); // TLI extern @near @interrupt void AWU_IRQHandler(void); // AWU extern @near @interrupt void CLK_IRQHandler(void); // CLOCK extern @near @interrupt void EXTI_PORTA_IRQHandler(void); // EXTI PORTA extern @near @interrupt void EXTI_PORTB_IRQHandler(void); // EXTI PORTB extern @near @interrupt void EXTI_PORTC_IRQHandler(void); // EXTI PORTC extern @near @interrupt void EXTI_PORTD_IRQHandler(void); // EXTI PORTD extern @near @interrupt void EXTI_PORTE_IRQHandler(void); // EXTI PORTE extern @near @interrupt void CAN_RX_IRQHandler(void); // CAN RX extern @near @interrupt void CAN_TX_IRQHandler(void); // CAN TX/SCE extern @near @interrupt void SPI_IRQHandler(void); // SPI extern @near @interrupt void TIM1_UPD_OVF_TRG_BRK_IRQHandler(void);// TIM1 UPD/OVF/TRG/BRK extern @near @interrupt void TIM1_CAP_COM_IRQHandler(void); // TIM1 CAP/COM extern @near @interrupt void TIM2_UPD_OVF_BRK_IRQHandler(void); // TIM2 UPD/OVF/BRK extern @near @interrupt void TIM2_CAP_COM_IRQHandler(void); // TIM2 CAP/COM extern @near @interrupt void TIM3_UPD_OVF_BRK_IRQHandler(void); // TIM3 UPD/OVF/BRK extern @near @interrupt void TIM3_CAP_COM_IRQHandler(void); // TIM3 CAP/COM extern @near @interrupt void USART_TX_IRQHandler(void); // USART TX extern @near @interrupt void USART_RX_IRQHandler(void); // USART RX extern @near @interrupt void I2C_IRQHandler(void); // I2C extern @near @interrupt void LINUART_TX_IRQHandler(void); // LINUART TX extern @near @interrupt void LINUART_RX_IRQHandler(void); // LINUART RX extern @near @interrupt void ADC_IRQHandler(void); // ADC extern @near @interrupt void TIM4_UPD_OVF_IRQHandler(void); // TIM4 UPD/OVF extern @near @interrupt void FLASH_IRQHandler(void); // FLASH CHECK extern @near @interrupt void NonHandledInterrupt (void); // Unexpected events // Exported constants -------------------------------------------------------- // Redirected constant section to usr_tab: 0x8100-0x8180 #pragma section const {usr_tab} struct interrupt_vector const UserISR_IRQ[32] = { {0x8200, (interrupt_handler_t)_stext}, // reset {0x8200, (interrupt_handler_t)TRAP_IRQHandler}, // trap - Software interrupt {0x8200, (interrupt_handler_t)TLI_IRQHandler}, // irq0 - External Top Level interrupt (TLI) {0x8200, (interrupt_handler_t)AWU_IRQHandler}, // irq1 - Auto Wake Up from Halt interrupt {0x8200, (interrupt_handler_t)CLK_IRQHandler}, // irq2 - Clock Controller interrupt {0x8200, (interrupt_handler_t)EXTI_PORTA_IRQHandler}, // irq3 - External interrupt 0 (GPIOA) {0x8200, (interrupt_handler_t)EXTI_PORTB_IRQHandler}, // irq4 - External interrupt 1 (GPIOB) {0x8200, (interrupt_handler_t)EXTI_PORTC_IRQHandler}, // irq5 - External interrupt 2 (GPIOC) {0x8200, (interrupt_handler_t)EXTI_PORTD_IRQHandler}, // irq6 - External interrupt 3 (GPIOD) {0x8200, (interrupt_handler_t)EXTI_PORTE_IRQHandler}, // irq7 - External interrupt 4 (GPIOE) {0x8200, (interrupt_handler_t)CAN_RX_IRQHandler}, // irq8 - CAN Rx interrupt {0x8200, (interrupt_handler_t)CAN_TX_IRQHandler}, // irq9 - CAN Tx/ER/SC interrupt {0x8200, (interrupt_handler_t)SPI_IRQHandler}, // irq10 - SPI End of transfer interrupt {0x8200, (interrupt_handler_t)TIM1_UPD_OVF_TRG_BRK_IRQHandler}, // irq11 - TIM1 Update/Overflow/Trigger/Break interrupt {0x8200, (interrupt_handler_t)TIM1_CAP_COM_IRQHandler}, // irq12 - TIM1 Capture/Compare interrupt {0x8200, (interrupt_handler_t)TIM2_UPD_OVF_BRK_IRQHandler}, // irq13 - TIM2 Update/Overflow/Break interrupt {0x8200, (interrupt_handler_t)TIM2_CAP_COM_IRQHandler}, // irq14 - TIM2 Capture/Compare interrupt {0x8200, (interrupt_handler_t)TIM3_UPD_OVF_BRK_IRQHandler}, // irq15 - TIM3 Update/Overflow/Break interrupt {0x8200, (interrupt_handler_t)TIM3_CAP_COM_IRQHandler}, // irq16 - TIM3 Capture/Compare interrupt {0x8200, (interrupt_handler_t)USART_TX_IRQHandler}, // irq17 - USART Tx complete interrupt {0x8200, (interrupt_handler_t)USART_RX_IRQHandler}, // irq18 - USART Rx interrupt {0x8200, (interrupt_handler_t)I2C_IRQHandler}, // irq19 - I2C interrupt {0x8200, (interrupt_handler_t)LINUART_TX_IRQHandler}, // irq20 - LINUART Tx interrupt {0x8200, (interrupt_handler_t)LINUART_RX_IRQHandler}, // irq21 - LINUART Rx interrupt {0x8200, (interrupt_handler_t)ADC_IRQHandler}, // irq22 - ADC end of conversion interrupt {0x8200, (interrupt_handler_t)TIM4_UPD_OVF_IRQHandler}, // irq23 - TIM4 Update/Overflow interrupt {0x8200, (interrupt_handler_t)FLASH_IRQHandler}, // irq24 - FLASH interrupt {0x8200, (interrupt_handler_t)NonHandledInterrupt}, // irq25 - Reserved {0x8200, (interrupt_handler_t)NonHandledInterrupt}, // irq26 - Reserved {0x8200, (interrupt_handler_t)NonHandledInterrupt}, // irq27 - Reserved {0x8200, (interrupt_handler_t)NonHandledInterrupt}, // irq28 - Reserved {0x8200, (interrupt_handler_t)NonHandledInterrupt}, // irq29 - Reserved }; // Restore default section #pragma section const {} // System interrupt table: 0x8000-0x8080 struct interrupt_vector const _vectab[] = { {0x8200, (interrupt_handler_t)_stext}, // reset {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 1)}, // trap - Software interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 2)}, // irq0 - External Top Level interrupt (TLI) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 3)}, // irq1 - Auto Wake Up from Halt interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 4)}, // irq2 - Clock Controller interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 5)}, // irq3 - External interrupt 0 (GPIOA) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 6)}, // irq4 - External interrupt 1 (GPIOB) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 7)}, // irq5 - External interrupt 2 (GPIOC) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 8)}, // irq6 - External interrupt 3 (GPIOD) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 9)}, // irq7 - External interrupt 4 (GPIOE) {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 10)}, // irq8 - CAN Rx interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 11)}, // irq9 - CAN Tx/ER/SC interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 12)}, // irq10 - SPI End of transfer interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 13)}, // irq11 - TIM1 Update/Overflow/Trigger/Break interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 14)}, // irq12 - TIM1 Capture/Compare interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 15)}, // irq13 - TIM2 Update/Overflow/Break interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 16)}, // irq14 - TIM2 Capture/Compare interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 17)}, // irq15 - TIM3 Update/Overflow/Break interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 18)}, // irq16 - TIM3 Capture/Compare interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 19)}, // irq17 - USART Tx complete interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 20)}, // irq18 - USART Rx interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 21)}, // irq19 - I2C interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 22)}, // irq20 - LINUART Tx interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 23)}, // irq21 - LINUART Rx interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 24)}, // irq22 - ADC end of conversion interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 25)}, // irq23 - TIM4 Update/Overflow interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 26)}, // irq24 - FLASH interrupt {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 27)}, // irq25 - Reserved {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 28)}, // irq26 - Reserved {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 29)}, // irq27 - Reserved {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 30)}, // irq28 - Reserved {0x8200, (interrupt_handler_t)(UserISR_IRQ+ 31)}, // irq29 - Reserved };// Copyright (c) 2009, Wolver Wang, Innov Inc.
阅读背景：
STM8中断向量表
来源：互联网
分享到：
